A shirt or pair of jeans can ruin an entire wash load without fading visibly itself. That happens when a garment has low colorfastness—meaning its dye is not locked tightly enough to resist water, friction, detergent, or heat—leading to dye migration onto lighter clothes. Even though care tags do not have a single standalone “colorfastness” symbol, manufacturers leave a clear trail of clues across the label.
Quick Answer
Care tags do not have a single “colorfastness” icon, so dye-migration warnings appear as combinations of cold wash limits, crossed-out bleach triangles, shade-drying lines, and text like “Wash separately.” These rules keep unbonded dyes from bleeding onto lighter laundry. Test questionable colors with a damp white cloth first.
Colorfastness vs. Dye Migration: What the Terms Mean
Colorfastness measures how well a fabric holds onto its dye when exposed to water, soap, sunlight, sweat, or rubbing. Dye migration (commonly called bleeding or color transfer) is what happens when loose dye leaves that garment and stains another fabric—either dissolved in wash water or rubbed off by dry friction (“crocking,” like raw denim turning a white purse blue).
How Care Labels Warn About Dye Migration
Because ISO 3758 and North American ASTM tags have no single pictogram for dye stability, brands stack four standard cues together whenever a garment carries bleeding risk:
- Low temperature limits in the wash tub: A
30°Cnumber or single dot caps water temperature at cold—see One Dot Symbol: Machine Wash Cold (30°C/85°F) Guide—because hot water opens fibers and flushes dye loose rapidly. - Sorting and surface-protection text lines: Warnings such as “Wash separately,” “Wash with like colors,” or “Color may transfer” signal active bleeding risk. Follow sorting rules in The “Wash Separately” Symbol: Dye transfer and chemical bleeding and pair them with The “Wash Inside Out” Symbol: Chemical and abrasion protection to cut surface dye friction.
- Restrictive bleach triangles: Low-colorfastness items carry either a crossed-out bleach triangle or, at minimum, the two-diagonal-line icon explained in “Use Oxygen Bleach Only”: Translating the symbol for colored loads.
- Shade-drying icons: A square with two diagonal lines in the top corner—covered in Square with Two Diagonal Lines (Corner): Dry in the Shade—warns that UV sunlight will fade poorly anchored dyes.
How to Test a Questionable Garment Before Washing
Whenever a new red sweater, indigo jean, tie-dye tee, or dark print feels suspiciously bright or carries multiple dye warnings, test it in 30 seconds before tossing it into a shared load:
- Wet an inconspicuous inside hem or seam with cool tap water (or a mild drop of your normal detergent solution).
- Press the wet spot firmly between a clean white paper towel or white cotton rag for 30 to 60 seconds.
- Check the white paper towel. Any visible tint means unbonded dye is ready to bleed—wash that item completely alone in cold water until its rinse water runs clear.
Also watch out for dry crocking: if a dry white cloth picks up blue or black pigment just from rubbing across dry denim or dark suede, that garment can stain light couches, leather seats, or pale bags even before its first wash.
What To Do If Dye Migrates Onto Another Garment
If a bleeding garment accidentally tints lighter clothes in your washer, act before heat sets the mistake:
- Do not put the tinted clothes in the dryer. Heat permanently bonds transferred dye onto cotton and polyester fibers.
- Separate the bleeding piece immediately and re-wash the stained load in cool water right away with a commercial color-run remover or tag-safe oxygen bleach.
- For dry dye rubbed onto light accessories or tops: Follow targeted lifting steps in Transfer Dye (Denim Bleed) on Light Purses or Tops.
Mistakes That Trigger Dye Migration
- Leaving damp loads sitting inside a stopped washer. Even cold-washed dark clothes transfer dye rapidly by direct wet contact if they sit pressed against lighter items after the spin stops.
- Mixing bright cottons with white polyester or nylon. Synthetic fabrics grab stray dye from wash water far more aggressively than cotton does, turning bright white athletic shirts gray or pink from just a faint dye bleed.
Reading colorfastness warnings means looking at the whole care tag together: cold wash limits, no-bleach triangles, shade-dry lines, and “Wash separately” text all work as an early warning system. Test bold new pieces with a damp white cloth first, keep them isolated until they rinse clear, and never let damp loads sit piled together.