Crossed-Out Square/Circle: Do Not Tumble Dry

A square with a circle inside it crossed out by a large “X” means Do Not Tumble Dry. Keep the garment completely out of your clothes dryer—even on Low Heat or an unheated Air Fluff cycle. The symbol warns that either the heat, the tumbling motion, or both will permanently damage the fabric, trim, or fit of the item.

Quick Answer

A crossed-out square with a circle inside means Do Not Tumble Dry. Keep the garment out of the dryer completely, even on Air Fluff or Low Heat. Press out excess water gently with a clean towel without twisting, then follow the air-dry symbol next to it on the care label.

What This Symbol Means

Laundry dryers cause damage in two ways: heat and mechanical agitation. A crossed-out dryer icon tells you the item cannot safely handle a tumbling drum.

Even without heat, repeatedly lifting and dropping a wet garment against dryer baffles creates friction and gravity stress. In practice, that combination causes several common failures:

A common mistake is assuming “Air Fluff” or “No Heat” is safe when you see this icon. It is not. When unheated tumbling is allowed, tags use the Tumble Dry – Solid Circle: No Heat/Air Fluff only symbol instead. An “X” across the dryer box means no machine tumbling at all.

How to Dry “Do Not Tumble Dry” Items Safely

When the dryer is off-limits, your care tag almost always includes a second square-shaped symbol right next to the crossed-out dryer telling you how to air dry the piece.

1. Read the Companion Air-Dry Symbol

Look closely at the lines inside the other square icon on your tag:

If your tag does not specify an air-dry method, use the fabric’s weight as your guide. Heavy knits, sweaters, and stretchy garments should dry flat; structured shirts, dresses, and lightweight activewear can hang on wide, non-slip hangers.

2. Extract Excess Water Without Wringing

Air drying takes much longer if the fabric is waterlogged. Before hanging or laying an item flat, lay it flat on a clean, dry bath towel, roll the towel up like a jelly roll, and press firmly with your hands or knees to blot out trapped water.

If the fabric is durable enough for machine washing and the wash label permits spinning, running a gentle spin cycle removes water far more safely than twisting by hand. For delicate items washed in the sink, check whether the fabric tolerates a brief spin using Drain & Spin Only: When to Use It for Hand-Washed Items.

3. Maximize Airflow While Air Drying

Give wet garments space so air moves freely around both sides. Hang clothes a few inches apart rather than crowding them on a rod, and flip flat-drying items over halfway through so the underside does not stay damp. In humid weather, placing a standing fan near your drying rack speeds up evaporation and prevents musty odors.

What to Avoid

  • Do not use shortcut heat sources: Never drape wet “Do Not Tumble Dry” garments over radiators, space heaters, or baseboard vents, and do not blast them with a hot hairdryer. Concentrated heat shrinks wool, warps synthetics, and leaves stiff spots just as easily as a dryer.
  • Never wring or twist wet delicates: Wet fibers—especially silk, wool, and rayon—stretch and tear easily when twisted. Always press water out instead.
  • Avoid thin wire hangers for heavy garments: Wet sweaters and thick knits pull downward under their own weight, leaving permanent shoulder bumps and stretched hems. For knitwear specifics, see Wool Drying Protocols: Decoding the “Flat Dry” icon.

What If You Already Put It in the Dryer?

If you realize mid-cycle that a “Do Not Tumble Dry” item slipped into the dryer, stop the machine right away and inspect it while it is still damp or warm:

  • If it looks slightly tight but not felted: Gently stretch cotton knits or rayon back toward their original measurements while damp and lay the garment flat to finish drying. Do not force or yank seams.
  • If wool looks thick, stiff, and miniature: Intense heat plus wet agitation causes wool scales to lock together (felting). Mild shrinkage can sometimes be relaxed slightly with cool water and gentle blocking, though heavy felting is permanent.
  • If spandex feels wavy, brittle, or stretched out: Melted elastane fibers cannot be restored, meaning the garment will not regain its original compression or snap.

Bottom Line

When you see a crossed-out tumble dry symbol, treat the dryer as completely off-limits—even without heat. Blot excess water with a towel, follow the companion flat-dry or line-dry icon on the tag, and let airflow do the work so the garment keeps its shape and finish.