Square with One Line Underneath: Permanent Press Drying

A tumble-dry square with a single horizontal line underneath it means Permanent Press Drying. Your garment is safe for machine drying, but it needs moderate heat paired with gentler mechanical handling and a built-in cool-down period at the end of the cycle to keep wrinkles from setting into synthetic and wrinkle-resistant fabrics.

Quick Answer

A tumble-dry square with one line underneath means Permanent Press Drying. Select Permanent Press, Wrinkle Control, or Casual on your dryer, using Low or Medium heat according to any dots inside the circle. Remove and hang items as soon as the cool-down phase ends so creases do not set.

What This Symbol Means

The bar system beneath laundry icons modifies how aggressive the machine cycle can be. Just as a single bar under the wash tub calls for gentler washing—explained in Single Underline (Bar): Permanent Press Temperature Thresholds—a single bar beneath the square modifies the dryer’s cycle profile.

Here is how to read every part of the icon together:

  • The square and circle: Machine tumble drying is permitted.
  • The single line underneath: Use a Permanent Press cycle, which lowers drum stress and transitions into unheated air during the final minutes of drying so warm fabrics cool down while still moving.
  • Dots inside the circle (if present): Set the temperature limit. One dot means low heat, as covered in Tumble Dry – One Dot: Low Heat/Delicate settings; two dots allow medium heat, as detailed in Tumble Dry – Two Dots: Medium Heat/Normal settings. If the circle is empty, standard medium heat for permanent press is typically fine.

Watch out for two symbols that look similar at a glance:

Permanent press tags most commonly appear on polyester-cotton dress shirts, wrinkle-resistant chinos, work uniforms, casual slacks, and synthetic blends. These fabrics resist creasing during wear, but if they cool down crumpled at the bottom of a hot dryer, those wrinkles become heat-set and stubborn to iron out.

How to Use Permanent Press Drying

1. Find the Matching Dial Name on Your Dryer

Many newer dryers no longer print the words “Permanent Press” on the control panel. Look for one of these common equivalents that run the same cool-down drying profile:

  • Wrinkle Control or Wrinkle Care
  • Casual
  • Synthetics or Easy Care
  • Mixed Load

Match the temperature option to any dots inside the symbol’s circle. When in doubt between medium and low on synthetic blends, choose the lower heat setting.

2. Give Clothes Room to Tumble

Permanent press drying relies on garments falling freely through warm air so creases release naturally. Fill the dryer no more than about two-thirds full. When shirts and slacks are packed tightly against each other, the cool-down phase cannot flatten out folds.

3. Unload Right After the Cycle Stops

The cool-down period helps prevent sharp creases, but leaving finished clothes piled under their own weight still creates wrinkles—especially if any residual warmth remains. Hang dress shirts and slacks immediately when the chime sounds, or follow the habits outlined in The “Remove Promptly” Warning: Symbol-based wrinkle prevention.

What to Avoid

  • Do not run High Heat or Heavy Duty cycles: High temperatures soften polyester and damage chemical wrinkle-resistant finishes, baking deep creases into seams and collars.
  • Do not mix heavy towels or denim into the load: Heavy cottons hold far more water than lightweight permanent press shirts. If your dryer uses a moisture sensor, the wet towels will force the machine to keep heating long after your shirts are already dry, causing over-drying, shrinkage, and static.
  • Do not skip the matching wash setting: Deep creases often start in the washing machine during a high-speed final spin. Wash these items on the matching permanent press wash setting—see Permanent Press vs. Normal: The Technical Difference in Agitation—so they enter the dryer less crumpled.

Troubleshooting When Things Go Wrong

Your Dryer Has No Permanent Press Setting

If your machine only offers basic Timed Dry with High, Medium, Low, and No Heat options, you can replicate Permanent Press manually. Set the heat to Medium (or Low if the circle has one dot), dry in a shorter timed block so the clothes do not bake bone-dry, and then run Air Fluff / No Heat for the final few minutes to cool the fabric while it tumbles.

Clothes Still Come Out Wrinkled

If permanent press items look creased even after using the right button, check three common culprits:

  1. Over-drying: Pull the load out when it is dry to the touch rather than baking it until crispy; many dryers have a “Less Dry” or “Damp Dry” sensor level that works better for collared shirts.
  2. Overloading: Reduce the batch size so sleeves and pant legs can unfold while tumbling.
  3. Delayed unloading: If you cannot hang clothes right away, turn on your dryer’s periodic tumble/wrinkle-shield feature if equipped, which tumbles the drum briefly every few minutes without heat until you open the door.

Items Take More Than One Cycle to Dry

Permanent press fabrics are usually lightweight synthetics or blends that dry quickly. If a small load still feels damp at the end of a full cycle, check the lint screen and inspect your exhaust hose or wall vent for clogs—restricted airflow traps humid air inside the drum, as explained in Why Your Dryer Takes Two Cycles: Identifying Airflow Restrictions.

Bottom Line

A single underline beneath the tumble-dry square tells you to keep heat controlled, tumble gently, and let the load cool down before stopping. Choose Permanent Press (or Casual/Wrinkle Control), keep heavy cottons out of the same batch, and hang items as soon as the cycle ends to preserve wrinkle-resistant finishes with minimal ironing.