A square with a single horizontal line across the middle means Dry Flat. You must lay the garment horizontally on a flat surface to air dry rather than hanging it or putting it in a tumble dryer. Manufacturers require flat drying for sweaters, woolens, cashmere, and stretchy knits because the weight of water pulls wet fibers downward, permanently stretching shoulders, sleeves, and hems if hung.
Quick Answer
A square with one horizontal line across the middle means Dry Flat. Never hang the garment wet or put it in a dryer. Gently blot excess water in a clean towel without wringing, lay the item flat on a mesh rack or dry towel, reshape the seams, and flip it halfway through.
What This Symbol Means
In laundry care charts, a straight horizontal line centered inside an empty square represents a flat surface. Because hanging a waterlogged knit allows gravity to pull loose loops out of alignment, drying flat supports the entire garment evenly while moisture evaporates.
Make sure you do not confuse Dry Flat with two similar-looking symbols:
- One line underneath a square with a circle inside: That is a machine dryer symbol for Permanent Press, covered in Square with One Line Underneath: Permanent Press Drying.
- Two horizontal lines inside the square: That calls for Drip Flat Dry, meaning you should not spin or wring the ultra-delicate item at all before laying it flat—see Two Horizontal Lines: Drip Flat Dry (Ultra-delicate).
Dry Flat almost always appears alongside Crossed-Out Square/Circle: Do Not Tumble Dry on wool, cashmere, alpaca, acrylic sweaters, heavy cotton knits, and delicate rayon blends. If you also see two diagonal lines in the top-left corner of the square, follow Combined Symbol: Dry Flat in the Shade and keep the item away from sunlit windows.
How to Dry a Garment Flat
1. Support the Wet Garment and Blot Out Water
Never lift a soaking-wet sweater by its shoulders or sleeves—always cradle the wet bundle from underneath with both hands so its own weight does not stretch the yarn.
Never wring or twist wet knits, especially if your tag carries The “Do Not Wring” Bow Symbol: Preserving shape through air drying. Instead, remove excess water safely first:
- For hand-washed knits: Lay a clean, dry white bath towel flat, place the garment on top, roll the towel and garment together into a cylinder, and press down gently with your hands to blot out water.
- For machine-washable items: If the wash instructions allow a gentle spin, a brief spin cycle removes far more water than hand pressing—learn when that is safe in Drain & Spin Only: When to Use It for Hand-Washed Items.
2. Lay It on a Breathable Surface
The best tool for flat drying is a mesh sweater drying rack, which elevates the garment so air circulates underneath as well as across the top.
If you do not have a mesh rack, spread a clean, dry towel across a flat table, countertop, or bed. Avoid putting damp towels directly onto finished wood surfaces without a waterproof barrier underneath, and use white or colorfast towels so dye never bleeds onto light-colored knits.
3. Reshape Before Leaving It to Dry
While the garment is still damp, smooth out creases with flat palms, line up side seams, lay sleeves naturally along the body, and pat cuffs and waistbands into neat alignment without yanking them. For finer sweaters that require exact sizing restoration, see The “Flat Dry” vs. “Block to Shape” Distinction and Wool Drying Protocols: Decoding the “Flat Dry” icon.
4. Flip Halfway Through
If the garment sits on a solid surface with a towel rather than an open mesh rack, the underside traps moisture. Once the top feels mostly dry, flip the sweater carefully over—supporting it with both hands—and swap out the damp towel underneath for a fresh, dry one.
What to Avoid
- Do not drape wet sweaters over chairs, railings, or hangers: Even folding a wet sweater over the crossbar of a drying rack creates a crease and stretches the hanging halves downward.
- Do not speed things up with radiators or space heaters: Direct heat shrinks wool, stiffens cotton knits, and damages delicate rayon blends—learn why heat-sensitive plant fibers require extra care in Rayon/Viscose Shrinkage: Why the tumble dry icon is often crossed.
- Do not use dark or shedding towels: Fluffy, brightly colored terry towels can leave lint all over dark sweaters or transfer stray dye onto pale wool.
Solving Common Flat-Dry Problems
The Sweater Takes Too Long to Dry and Smells Musty
Slow drying usually happens when too much water stayed in the yarn or when air cannot reach the underside of the fabric. Press the sweater in a second dry towel before laying it out, move it onto an open mesh rack (or place a wire cooling rack under a thin cotton sheet), and set a fan nearby to keep room air moving across the surface.
The Sweater Still Looks Stretched or Misshapen
If a sweater dried slightly longer or wider than usual, it was likely lifted while heavy with water or pulled while wet. Lightly mist the garment with cool water, pat it gently inward back toward its proper dimensions on a dry towel, and let it air dry completely before moving it.
Bottom Line
A single horizontal line inside the drying square protects knits and delicate weaves from gravity and dryer heat. Cradle wet garments from underneath, press excess water out in a towel, reshape the seams neatly on a breathable rack or dry towel, and flip halfway through so your sweaters keep their original fit season after season.