Diagonal Line (Top Right): No Steam Finishing

Professional dry cleaning involves two distinct stages: cleaning the fabric in a solvent bath, and finishing (pressing) the garment so it looks sharp and ready to wear. While most dry-cleaned garments are pressed using high-temperature steam utility presses, some fabrics cannot tolerate moisture vapor during this final step. When a care label features a professional cleaning circle with a diagonal line in the upper-right corner, it delivers an explicit rule to the finishing department: do not use steam during finishing.

Quick Answer

A diagonal line in the top right of a dry cleaning circle indicates “No Steam Finishing.” It instructs the commercial presser that the garment must be finished using dry heat, unheated air, or manual cold pressing only. Live steam must be avoided to prevent surface glazing, blistering, fabric rippling, or water spots.

What This Means: The Commercial Finishing Floor

The finishing department of a dry cleaner uses heavy industrial equipment designed to make pressing fast and consistent. Form finishers, steam tunnels, and utility presses inject pressurized steam through the fabric from the inside out to relax wrinkles instantly.

However, certain high-end and specialty materials react poorly to steam:

  • Cellulose Acetates and Triacetates: Commonly found in lustrous linings, evening dresses, and formal wear, acetate can water-spot or lose its sheen when hit with live steam.
  • Glazed Cottons and Embossed Fabrics: Fabrics with calendar-rolled finishes, moiré effects, or waxed layers can lose their surface patterns under steam heat.
  • Fusible Tailoring Adhesives: High-pressure steam can penetrate lightweight woven fabrics and dissolve the adhesive bonding internal interfacings, resulting in bubbling along lapels and collars.
  • Heat-Sensitive Pleating: Synthetic skirts with fine accordion or sunburst pleats can lose their sharp edges when exposed to steam vapor.

While the crossed-out steam iron icon (see The “No Steam” Ironing Symbol: Specific to dry cleaning finishes) applies broadly to domestic and commercial hand ironing, the top-right diagonal line on a dry-cleaning circle specifically governs commercial finishing machinery.

What To Do: Navigating No-Steam Care

To ensure your garment is finished safely:

  • Highlight the Symbol at Drop-Off: Inform the cleaner that the garment cannot be placed on an automated steam mannequin or run through a steam tunnel.
  • Confirm Hand-Pressing Capabilities: Ask if the cleaner can hand-finish the item on a dry iron table or use a “hot-head” press without steam injection.
  • Check Linings and Hems: Make sure the cleaner knows to press the garment from the reverse side using a protective dry pressing cloth to avoid creating surface shine on seams and pocket flaps.

What to Avoid

Never use a home handheld clothes steamer on a garment with this symbol. Handheld steamers spit tiny droplets of boiling water along with vapor, which can leave stubborn water rings and cause localized fabric ripples on steam-sensitive fabrics.

When Garments Have Heavy Creases

If a no-steam garment arrives with deep shipping or storage creases, a professional cleaner will address them using dry pressure, controlled low heat, and vacuum extraction. Placing an unheated wooden tailor’s clapper over a freshly pressed dry seam sets it flat and sharp without needing moisture vapor.

The Bottom Line

The diagonal line in the top right protects your clothes from the powerful steam presses found in commercial cleaning plants. By pointing out this mark, you ensure your garment receives gentle, dry-heat finishing that keeps its crisp silhouette, smooth texture, and original luster intact.