The “Favorite” Setting: How to Program Your Custom Fabric Profile

The “Favorite” setting (often labeled “My Cycle” or “Custom Profile”) is a programmable memory feature found on modern washing machine control boards. Instead of requiring you to adjust temperature dials, spin speeds, soil levels, and rinse modifiers every time you wash a specific category of clothing, the Favorite button recalls a complete, saved wash profile with a single press. Programming this setting eliminates user error, protects sensitive textiles, and saves time on frequent loads.

What Does the Favorite Setting Do on a Washer?

The Favorite setting saves a customized combination of wash cycle parameters—including base program, water temperature, soil level, spin speed, and secondary modifiers like extra rinses—into the machine’s onboard memory. Once saved, pressing the Favorite button instantly loads that exact setup without manual adjustments.


Why Programming a Custom Profile Matters

Modern electronic washers provide dozens of setting combinations. However, factory presets do not always match a household’s specific fabrics, local water hardness, or skin sensitivities.

Factory "Normal" Preset:  [Warm Water] ──► [Normal Soil] ──► [High Spin] ──► [Single Rinse]
Your Needs (Activewear):  [Cold Water] ──► [Heavy Soil]  ──► [Medium Spin]──► [Extra Rinse]

Manually reconfiguring four or five buttons every time you wash workout apparel, cloth diapers, or work shirts leads to frequent setup mistakes. Forgetting to lower the spin speed can crease delicate garments, while forgetting to add an extra rinse can leave detergent trapped in the fibers.

Programming a dedicated Favorite cycle establishes an exact operational baseline that any household member can activate reliably.


How to Program Your Custom Wash Profile

While control interfaces vary slightly between manufacturers (such as Whirlpool, LG, Samsung, and GE), the core electronic programming logic follows an industry-standard sequence:

Programming Flowchart:
[Select Base Cycle] ──► [Adjust Modifiers] ──► [Press & Hold "Favorite" 3 Sec] ──► [Chime Confirms Save]
  1. Power On the Appliance: Turn the machine on. Do not press Start yet.
  2. Select the Base Cycle: Rotate the main dial to the foundational cycle that matches your fabric weave. For everyday synthetics and blended shirts, select the base cycle detailed in Permanent Press vs. Normal: The Technical Difference in Agitation. For silk or sheer items, select the base program outlined in The “Delicate” Cycle: Water Levels and Drum Rotation Speed.
  3. Set the Water Temperature: Tap the Temperature button to choose the precise heat level.
  4. Calibrate Soil Level: Select the mechanical action profile. To understand how this modifier adjusts wash dwell times, review Soil Level Settings: How “Heavy Soil” Changes the Wash Profile.
  5. Set Maximum Spin Speed: Adjust the RPM limits based on whether you want maximum moisture extraction or wrinkle prevention.
  6. Toggle Desired Modifiers: Add specialty options such as Steam, Pre-Wash, or an extra water pass; check Extra Rinse: The Science of Removing Residual Surfactants.
  7. Store to Memory: Press and hold the Favorite or My Cycle button for three full seconds. The control board will emit a double chime or flash an LED indicator, confirming the configuration is locked into memory.

If you are unsure which configuration provides the most day-to-day value, select one of these three field-tested profiles:

1. The Activewear Preserver Profile

Technical gym wear contains elastane, Lycra, and polyester microfibers that degrade under hot water and high spin speeds, but require aggressive soil removal to eliminate locked-in body oils.

2. The Sensitive Skin and Towel Profile

Designed for dense cotton bath towels and clothing worn by individuals prone to contact allergies or eczema.

  • Base Cycle: Heavy Duty or Towels
  • Temperature: Warm or Hot
  • Soil Level: Normal
  • Spin Speed: Extra High (maximizes extraction to shorten drying)
  • Modifiers: Extra Rinse enabled by default

3. The Professional Business-Casual Profile

Optimized to clean work trousers and woven button-down shirts while minimizing morning ironing time.

  • Base Cycle: Casual / Perm Press
  • Temperature: Warm (cools down before drain)
  • Soil Level: Light to Normal
  • Spin Speed: Low or Medium (prevents pressed-in creases)
  • Modifiers: Wrinkle Shield or Tumble Care enabled

Managing Smart Washers and Connected App Profiles

On modern Wi-Fi-enabled washing machines, the Favorite button often integrates directly with mobile apps (such as LG ThinQ, Samsung SmartThings, or GE SmartHQ).

Connected Profile Options:
Control Panel: Holds 1 Single Static Memory Profile
Mobile App:    Stores Multiple Custom Presets ──► Sends Desired Profile via Wi-Fi

Using the mobile app allows you to name and store dozens of custom recipes—such as “Dog Bedding,” “Hockey Gear,” or “Linen Curtains”—and transmit them to the machine’s dial as a temporary “Downloaded Cycle.”

If your washer loses its saved favorite setting after a power interruption or refuses to sync with downloaded profiles, resolve the control link via Smart Washer Connectivity: Troubleshooting Wi-Fi and App Issues.


Common Mistakes When Setting Custom Profiles

  • Overriding Without Re-saving: If you load your Favorite cycle and manually tap the temperature button to adjust for one specific garment, the machine only applies that change for the current load. It does not overwrite your saved profile unless you hold the Favorite button down again for three seconds.
  • Selecting Incompatible Modifiers: Some base cycles block specific combinations for fabric safety. For example, selecting a Delicate base cycle will prevent the control board from saving a “High” or “Extra High” spin speed.
  • Using Favorite for Changing Soil Conditions: The Favorite profile is meant for predictable, repeating loads. If a load has unusual stains, it is better to program that cycle manually rather than overwriting your standard saved preset.