Mothball Odor Removal: Deep Cleaning Stored Items

Unpacking a chest of heirloom woolens, vintage suits, or seasonal winter coats only to be met by a suffocating, medicinal chemical reek is an all-too-common experience. For generations, households relied on mothballs to protect wool, cashmere, and down from fabric-eating moth larvae. While effective at repelling pests, mothballs leave behind an overwhelming stench that clings tenaciously to fibers, closets, and skin. Masking this odor with perfumes, laundry sprays, or scented detergents does not work. Mothball fumes are caused by heavy, volatile chemical crystals that absorb deep into the molecular structure of textiles and must be extracted through systematic aeration, adsorption, and washing.

How to Remove Mothball Odors from Clothing

Hang the garments outdoors in a breezy, shaded area for 2 to 4 days to allow the chemical fumes to sublimate. For washable items, soak in warm water with one cup of baking soda, wash with heavy-duty detergent and a white vinegar rinse, and line dry.

The Chemistry of Mothballs: Naphthalene vs. Paradichlorobenzene

To eliminate mothball odors permanently, you must understand what chemical you are dealing with. Traditional mothballs are made of one of two toxic, volatile aromatic hydrocarbons:

  1. Naphthalene: The older formulation (identifiable by a pungent, coal-tar odor). Naphthalene is a crystalline solid that slowly turns directly from a solid into a toxic gas at room temperature—a physical process called sublimation.
  2. Paradichlorobenzene (1,4-Dichlorobenzene or PDB): The modern formulation (identifiable by a sharp, sweetish, penetrating chemical smell). PDB also sublimates rapidly.

Because these compounds are hydrophobic and lipophilic (fat-soluble), their airborne gas molecules dissolve straight into the natural oils, synthetic polymers, and lanolin of textile fibers.

Crucially, mothball residue is not a surface dust—it is an absorbed volatile gas. Washing a fresh mothball-scented sweater immediately in a closed washing machine will simply contaminate the appliance’s rubber gaskets and transfer the chemical smell to the next ten loads of laundry. The chemicals must first be allowed to evaporate out of the fabric into open air.

Phase 1: Sublimation and Outdoor Aeration (Non-Negotiable)

Fresh air and wind are the most critical steps in mothball removal. Water cannot dissolve solid naphthalene; air movement must drive the sublimation process.

  1. Hang the affected clothing on sturdy hangers in an outdoor, covered area (such as a screened porch, covered patio, or carport) where air circulates freely.
  2. Keep the garments in the shade. Direct sunlight can degrade vintage fibers and oxidize certain dye formulas.
  3. Allow the items to air out for a minimum of 48 to 96 hours. For heavy wool coats or dense quilts stored in mothballs for years, outdoor aeration may take up to a full week.
  4. If you do not have outdoor space, hang the garments in a spare room or garage with the windows open and an electric box fan blowing air directly across the clothes toward an open window.

Phase 2: Alkaline and Acidic Decontamination (For Washable Items)

Once the overwhelming fumes have dissipated through aeration, residual chemical traces can be extracted through targeted soaking and laundering.

Step 1: The Baking Soda Alkaline Soak

Baking soda (sodium bicarbonate) elevates water pH and helps release stubborn aromatic hydrocarbons from cellulose and synthetic fibers.

  1. Fill a deep sink, utility tub, or bucket with warm water (or cool water if washing wool).
  2. Dissolve one to two cups of baking soda into the water. The pH balancing properties of sodium bicarbonate are covered in Baking Soda in Laundry: pH Balancing for Brighter Whites.
  3. Submerge the aerated clothing completely.
  4. Let the garments soak for 4 to 8 hours. Stir the water occasionally to keep the solution circulating through the weave.
  5. Drain the tub and gently press out the water.

Step 2: The Machine Wash and Vinegar Rinse

  1. Place the garments into the washing machine. If handling delicate animal fibers like wool or cashmere, use a neutral formula as outlined in Wool Washes and Neutral pH: Protecting Animal Fibers.
  2. For regular cottons, synthetics, and linens, use a heavy-duty liquid detergent.
  3. Pour one full cup of distilled white vinegar into the fabric softener compartment. Acetic acid breaks down lingering chemical odors and strips away mineral residues, as detailed in The Truth About Vinegar: Does It Actually Act as a Softener?.
  4. Run a complete wash cycle, adding an extra rinse if your machine permits.
  5. Line dry the clothes outdoors. Do not place items with residual mothball scent into a tumble dryer. High heat can bake chemical vapors into synthetic linings and spread toxic fumes into your living space.

Phase 3: The Adsorption Chamber (For Non-Washable Wool and Leather)

For structured suits, fine leather jackets, lined wool overcoats, or delicate vintage gowns that cannot be submerged in water, build an enclosed adsorption chamber.

  1. Obtain a large plastic storage bin with a tight-fitting lid.
  2. Pour a two-inch layer of activated charcoal granules, cedar shavings, or unscented clay cat litter across the bottom of the bin.
  3. Place a clean wire rack, inverted laundry basket, or sheet of cardboard over the absorbent material so the clothing never touches the charcoal directly.
  4. Lay the aerated garment inside the bin across the rack.
  5. Seal the lid tightly and store the bin in a cool room for one to two weeks.
  6. The highly porous activated carbon acts as a molecular sponge, capturing sublimated naphthalene and PDB vapors as they leave the garment.

When to Seek Professional Solvent Extraction

If heavy wool overcoats or tailored blazers retain a chemical odor after a week of aeration and carbon adsorption, take them to a professional dry cleaner.

Inform the staff that the garment has been stored with naphthalene mothballs. Dry cleaning does not use water; it uses organic chemical solvents like hydrocarbon or perchloroethylene. Because naphthalene and paradichlorobenzene are petroleum-derived hydrocarbons, they dissolve readily in commercial dry cleaning solvents, flushing the chemical out of internal wool interfacings without risking shrinkage. Always check the care label for The Empty Circle: Professional Dry Clean Only before taking high-end coats in for service.